MAX3232ECDE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 300 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232ECDE4 Overview
This LED driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The receiver is packaged in a Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 3V~5.5V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.With a supply voltage range of 3.3V, this line driver ic operates efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.This transceiver is packaged with 16 market standard pinoutsSince the part number MAX3232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This receiver is typically specified with a resolution of 2 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.The module isolated transceiver implements a total of 1 transceivers.Embedded 2 drivers are included on the integrator circuit.Additionally, this optical transceiver module features the CAN ALSO OPERATE WITH 5V SUPPLY function, which improves the stability and accuracy of signal management in general.
MAX3232ECDE4 Features
Tube package
16 pin count
16 pins
MAX3232ECDE4 Applications
There are a lot of Texas Instruments MAX3232ECDE4 Drivers/Receivers/Transceivers applications.
- Clock radio
- Automation systems
- Aircraft navigation
- Satellite ground stations
- Changeing the frequency from IF to RF
- Precision engineering measurement
- Telecom applications
- Fast Ethernet
- Wireless 3D game
- Single fiber bidirectional application
