MAX3232ECDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Output Voltage | 3.5V |
| Power Supplies | 3.3/5V |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 300 ns |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Drain to Source Resistance | 300Ohm |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232ECDG4 Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.A Surface Mount-type PCB or development board can be used to place this wide receiver.A power supply of 3V~5.5V is used by this differential driver.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 3.3V can operate efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.For more variants of this part, try searching with the base part number MAX3232, which indicates the product type, temperature, package, etc.This is a 16-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.This receiver is typically specified with a resolution of 2 bits. A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC3.3/5V is a high performance driver IC designed to work with a 3.3/5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.The part is embedded with 2 drivers, so it can be used with 2 devices.In addition, the optical transceiver module's CAN ALSO OPERATE WITH 5V SUPPLY function improves signal management accuracy and stability overall.Voltage can be delivered at 3.5V by Wide receiver.
MAX3232ECDG4 Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232ECDG4 Applications
There are a lot of Texas Instruments MAX3232ECDG4 Drivers/Receivers/Transceivers applications.
- Car radio
- Fiber optic cable connection network
- Transmission stations
- Remote controls
- Satellite ground stations
- AV receiver
- Wireless network systems
- Sensor reporting
- LAN, SAN, WAN (local, storage, work area networks)
- VoIP phones
