MAX3232ECWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 300μA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 1Mbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 2.65mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232ECWE+ Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.295, 7.50mm Width) package.This receiver is mounted in the Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.The wide receiver can be mounted on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 3V~5.5V.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Wide receiver can operate within the range of 3.3V supply voltages efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.Transceiver comes with 16 standard pinouts that meet the market's requirements.As the base part number MAX3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 16-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 2 bits.There is typically a resolution of 2 bits specified with this receiver.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed to be operated from a 3.3/5V power supply, so the module isolated transceiver will work effectively.ICs implement a total of 1 transceivers.There are 8 standard serial I/O ports on this IC, which makes it a very versatile one.It is embedded with a total of 2 channels on this optical transceiver.
MAX3232ECWE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
2 channels
MAX3232ECWE+ Applications
There are a lot of Maxim Integrated MAX3232ECWE+ Drivers/Receivers/Transceivers applications.
- Home theater wiring-free
- Wireless access points
- Servers
- WDM transmission
- Metro access rings
- VoIP phones
- Wireless interactive experience
- Cell phones
- Military satellite communications
- Wireless modems
