MAX3232EEAE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232E |
| Pin Count | 16 |
| Output Voltage | 13.2V |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 300μA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.99mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3232EEAE+T Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SSOP (0.209, 5.30mm Width) package.There is a Tape & Reel (TR) package for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.This wide receiver can be placed on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 3V~5.5V.As many as 2/2 receivers/drivers are eligible for use on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 3.3V supply voltages efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.For more variants of this part, try searching with the base part number MAX3232E, which indicates the product type, temperature, package, etc.A 16-pin driver IC with enhanced power dissipation control is featured here.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As a general rule, this receiver has a resolution of 2 bits that is usually specified.Line Driver or Receivers is a subcategory of this rf transceiver module.Driver ICs such as this one are designed to operate from 3.3/5V power sources.There are 1 transceivers implemented in this module isolated transceiver.The part is embedded with 2 drivers, so it can be used with 2 devices.This is an IC that comes with a total of 8 standard serial I/O ports.Using 13.2V as a voltage source, Wide receiver is able to deliver voltage.
MAX3232EEAE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3232EEAE+T Applications
There are a lot of Maxim Integrated MAX3232EEAE+T Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Bar, KTV wireless entertainment
- Precision geodetic measurement
- Wireless modems
- Wireless smart house
- Home theater wiring-free
- Indoor ad hoc meeting
- Fast Ethernet
- Wired telephone
- Broadcast application
