MAX3232EEUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Transceiver |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | MAX3232 |
| Operating Supply Voltage | 5V |
| Interface | RS-232 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 300μA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Protocol | RS232 |
| Number of Drivers/Receivers | 2/2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Number of Receivers | 2 |
| Number of Transmitters | 2 |
| Height | 1.1mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232EEUE+ Overview
Designed for common LEDs, this driver IC features an enhanced 16-TSSOP (0.173, 4.40mm Width) package.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Surface Mount-type PCB or development board.A power supply of 3V~5.5V is used by this differential driver.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.For more variants of this part, try searching with the base part number MAX3232, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 16 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.There is a voltage supply of 5V required in order for this transceiver module to be operated.Transceivers implemented by this IC total 1 in total.The module isolated transceiver contains 2 receivers.Embedded 2 drivers are included on the integrator circuit.Under 85°C, the operating transceiver module's temperature must be kept below.There must be at least -40°C minimum operating temperature for this optical transceiver.It has the ability to drive LEDs with an input voltage of up to about 1mA with the help of this integrating circuit.This IC has a transceiver's maximum supply voltage of 5.5V and is rated for use in a wide range of applications.2 transmitters are present, which produce radio waves for the purpose of transmitting or sending data.In order to run this line driver ic, the supply voltage must be at least 3V.In this case, the wide receiver uses the 16-TSSOP supplier package.
MAX3232EEUE+ Features
Tube package
16 pins
MAX3232EEUE+ Applications
There are a lot of Maxim Integrated MAX3232EEUE+ Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Wireless interactive experience
- Car radio
- interconnection between switches
- Aircraft navigation
- Thermal management
- Wireless projection application for conferences
- Laser diode bonding
- Tuner
- Vehicle
