MAX3232EIDWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Output Voltage | 3.5V |
| Power Supplies | 3.3/5V |
| Number of I/O | 8 |
| Nominal Supply Current | 1mA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 3.3V |
| Drain to Source Resistance | 300Ohm |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232EIDWG4 Overview
The enhanced 16-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.The package of this receiver is Tube.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, you can install this wide receiver.A power supply of 3V~5.5V is used by this differential driver.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.This part number MAX3232 can be used to search for more variants based on the product type, temperature, package, etc.16-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This driver IC is designed to operate from a 3.3/5V power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.On the integrator circuit are embedded 2 drivers.In addition, the optical transceiver module incorporates a CAN ALSO OPERATE WITH 5V SUPPLY function that improves the overall stability and accuracy of the signal management.There are 8 serial I/Os on board this IC, and it has a standard VGA interface.3.5V is the voltage Wide receiver can deliver.
MAX3232EIDWG4 Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232EIDWG4 Applications
There are a lot of Texas Instruments MAX3232EIDWG4 Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- High-speed computer links
- Long-distance fiber optic network applications
- SONET/SDH Network
- Routers
- Cable network front end
- Radio transmission
- Fiber-to-the-desktop
- Fiber optic cable connection network
- VoIP phones
