MAX3232ESE+
| Parameters | |
|---|---|
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Nominal Supply Current | 300μA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Simplex/Duplex | Duplex |
| Number of Receivers | 2 |
| Out Swing-Min | 10 V |
| High Level Input Current-Max | 0.000001A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX3232ESE+ Overview
The enhanced 16-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.In the Tube package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver requires a 3V~5.5V power supply.This electronic part can have?up to 2/2 eligible receivers/drivers on the field at once.?The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.With a voltage range of 3.3V, this driver IC can operate efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.As the base part number MAX3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.16-pin driver chip with enhanced power dissipation.This ic receiver provided a 2-bit resolution capability. It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.This driver IC is designed to operate from a 3.3/5V power supply.There are also 2 receivers in it as well.Additionally, this optical transceiver module features the EXTERNAL CHARGE PUMP function, which improves the stability and accuracy of signal management in general.
MAX3232ESE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232ESE+ Applications
There are a lot of Maxim Integrated MAX3232ESE+ Drivers/Receivers/Transceivers applications.
- Vehicle
- Automation systems
- Remote controls
- Fiber optic cable connection network
- VoIP phones
- Metro access rings
- WDM transmission
- Fiber-to-the-desktop
- Thermal management
- Datacom networking applications
