MAX3232ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 300μA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.75mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232ESE+T Overview
LED drivers benefit from this IC's enhanced 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) package is used for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.This part number MAX3232 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation driver IC with 16 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a subcategory named Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 3.3/5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.2 drivers are embedded on the integrator circuit.In addition, the optical transceiver module incorporates a EXTERNAL CHARGE PUMP function that improves the overall stability and accuracy of the signal management.It is an integrated circuit with 8 serial I/Os that are in line with industry standards.
MAX3232ESE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3232ESE+T Applications
There are a lot of Maxim Integrated MAX3232ESE+T Drivers/Receivers/Transceivers applications.
- Optical sub-assembly (OSA)
- Shortwave receiver
- WDM transmission
- Wireless security systems
- Fiber optic cable connection network
- Thermal management
- Carrier phase observations
- Televisions
- Satellite ground stations
- Tuner
