MAX3232EUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Interface | RS-232 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 300μA |
| Propagation Delay | 300 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 1.1mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3232EUE+T Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-TSSOP (0.173, 4.40mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 3V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 3.3V can operate efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.This transceiver is packaged with 16 market standard pinoutsMAX3232 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 16-pin driver IC.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There are typically 2 bits of resolution specified in the specifications of this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.Line Driver or Receivers is a subcategory of this rf transceiver module.Transceivers implemented by this IC total 1 in total.The part is embedded with 2 drivers, so it can be used with 2 devices.It is capable of driving LEDs with a voltage of 1mA as the input voltage to this integrating circuit.
MAX3232EUE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
MAX3232EUE+T Applications
There are a lot of Maxim Integrated MAX3232EUE+T Drivers/Receivers/Transceivers applications.
- Fiber distributed data interface (FDDI)
- Bridges
- Carrier phase observations
- Wireless security systems
- Interconnection between switches and computers
- Clock radio
- Wireless transmission
- Routers
- IPTV front end
- Mainframes, workstations or storage devices
