MAX3238EEAI+
| Parameters | |
|---|---|
| Supply Current-Max | 2mA |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 5/3 |
| Driver Number of Bits | 5 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 600mV |
| Output Low Current-Max | 0.001A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 10.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3238 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
MAX3238EEAI+ Overview
LED drivers with the enhanced 28-SSOP (0.209, 5.30mm Width) package will be able to drive a variety of common LEDs with ease.Tube package is used to mount this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver consumes 3V~5.5V for its power supplyAs many as 5/3 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.This line driver ic can operate efficiently with a supply voltage range of 3.3V.Wide receiver has 28 terminations built in for driving or receiving signals from data.It is packaged with 28 pinouts that are market standard for this particular transceiver.Since the base part number MAX3238 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control is provided by this 28-pin driver IC.In this ic receiver, the resolution was able to be set to a maximum of 5 bits.As a general rule, this receiver has a resolution of 3 bits that is usually specified.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs such as this one are designed to operate from 3.3/5V power sources.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 2mA of input current.
MAX3238EEAI+ Features
Tube package
28 pin count
28 pins
3.3/5V power supply
MAX3238EEAI+ Applications
There are a lot of Maxim Integrated MAX3238EEAI+ Drivers/Receivers/Transceivers applications.
- Copper connection network
- Fiber distributed data interface (FDDI)
- Satellite communication
- Structural bonding
- Aircraft navigation
- WDM transmission
- transmission relay
- Wireless 3D game
- Wireless teaching
- Changeing the frequency from IF to RF
