MAX323CPA+

150ns, 100ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX323 8 Pins 5V 8-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX323CPA+
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 512
Description: 150ns, 100ns SPST - NO 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX323 8 Pins 5V 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1998
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	MAX323
Output	SEPARATE OUTPUT
Pin Count	8
Operating Supply Voltage	15V
Power Supplies	3.3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	100pA
Max Supply Current	100pA
Throw Configuration	SPST
Turn On Delay Time	150 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.7V~16V
Drain to Source Resistance	33mOhm
Normal Position	NO
Height	4.45mm
Length	9.91mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX323CPA+ Overview

Packed in 8-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around 0°C~70°C TA. In total, 8 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 8 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. The multiplexer consists of 2 circuits. Using the MAX323 search parameter, you can discover variants of the switch. Analog switches have 60Ohm internal resistance. Datasheets for functions of 8 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 16V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. For this digital switch to work, 1μA current would suffice. Analogue multiplexers require a 2.7V~16V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 100pA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electronic component can function from 15V. The Drain to Source resistance of this electronic component is 33mOhm.