MAX323EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100pA |
| Max Supply Current | 100pA |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| Off-state Isolation-Nom | 72 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX323EPA+ Overview
The electronic component is convenient to ship overseas because it is packed in a DIP. This high-reliability packaging method uses advanced packaging methods Tube. Total terminations are 8. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. Analog switches have 60Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. In normalcircumstances, users should not exceed 16V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. 2.7V is the lowest voltage that should be fed to the electronic electronic part. 1μA current would be enough for this multiplexer to operate. When the digital multiplexer is charged above 100pA, damage can occur. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
MAX323EPA+ Features
1 Channels
1μA Supply Current
MAX323EPA+ Applications
There are a lot of Maxim Integrated MAX323EPA+ Analog Switches & Multiplexers ICs applications.
- Avionics
- High-Voltage
- DVD-R
- Fiber In The Loop (FITL)
- Relay replacements
- Precision test equipment
- USB 1.1 signal switching circuits
- Microprocessor Controlled Analog Systems
- Fault Tolerant Systems
- Automotive applications
