MAX3243EIDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX3243 |
| Pin Count | 28 |
| Output Voltage | 13.2V |
| Operating Supply Voltage | 5V |
| Number of I/O | 16 |
| Nominal Supply Current | 1mA |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 500kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 3/5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 3 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 5 |
| Out Swing-Min | 5 V |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3243EIDB Overview
This driver chip is excellent for driving common LEDs due to its enhanced 28-SSOP (0.209, 5.30mm Width) package.This receiver is mounted in the Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver requires a 3V~5.5V power supply.During operation, this electronic part may have up to 3/5 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.3.3V is the supply voltage range that this line driver ic can efficiently operate with.Integrated into this wide receiver are 28 terminations that are used for driving and receiving signals from data.There are 28 pinouts available on this transceiver which are market standard.MAX3243 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.This is a 28-pin driver IC with enhanced power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.This transceiver module is designed to operate from an input voltage supply of 5V.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.There are 1 transceivers in total implemented by this IC.A 5 receiver is included.The part is embedded with 3 drivers, so it can be used with 3 devices.It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 1mA.A 16-serial I/O IC is available which provides a standard interface for serial communication.The device is capable of delivering voltage at 13.2V.In this bluetooth transceiver, we are able to get a maximum output current of 60mA.
MAX3243EIDB Features
Tube package
28 pin count
28 pins
MAX3243EIDB Applications
There are a lot of Texas Instruments MAX3243EIDB Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- transmission relay
- Pocket PC
- Datacom networking applications
- Car radio
- Remote controls
- Wireless modems
- Precision geodetic measurement
- Changeing the frequency from IF to RF
- Routers
