MAX324CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | TIN |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX324 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 240 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 150 ns |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2.7V~16V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX324CUA+ Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around 0°C~70°C TA is the extended operating temperature. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There is an electrical component included in the 8 series. SPST - NC switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Search with MAX324 if you are looking for analog multiplexer variants. It has an internal resistance of 60Ohm. For functions related to 8 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 2.7V. The analogue multiplexer could operate on 1μA current. A voltage of 2.7V~16V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 1μA on the multiplexer may cause damage.
MAX324CUA+ Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX324CUA+ Applications
There are a lot of Maxim Integrated MAX324CUA+ Analog Switches & Multiplexers ICs applications.
- Public switching systems
- High-Voltage
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video switching
- DSUs
- Automatic test equipment
- Precision instrumentation
- Automotive applications
- E1 Network Equipment
- Remote wireless modules
