MAX325CUA+

150ns, 100ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX325 8 Pins 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX325CUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 913
Description: 150ns, 100ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX325 8 Pins 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Pin Count	8
Power Supplies	3.3/5V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	100pA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Supply Type	Single
Turn-Off Delay Time	400 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	150ns
Switch-off Time-Max	100ns
Voltage - Supply, Single (V+)	2.7V~16V
Height	910μm
Length	3.05mm
Width	3.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1998
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	330mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX325
Output	SEPARATE OUTPUT

MAX325CUA+ Overview

Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 2. Using the MAX325 search parameter, you can discover variants of the switch. Analog switches have 60Ohm internal resistance. The functions of 8 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16V. An effective Single supply digital multiplexer. 2.7V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 1μA current. Using only a single voltage supply, this analog switch requires 2.7V~16V voltage. It may damage the digital multiplexer if the voltage is higher than 1μA. This analog switch ic utilizes SEPARATE OUTPUT output.