MAX32625IWY+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 63-WFBGA, WLBGA |
| Surface Mount | YES |
| Number of Pins | 63 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | DARWIN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 63 |
| Additional Feature | ALSO REQUIRES 1.8V NOM SUPPLY, SEATED HGT-CALCULATED |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Frequency | 96MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX32625 |
| Supply Voltage-Max (Vsup) | 1.26V |
| Supply Voltage-Min (Vsup) | 1.14V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 160K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.14V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4F |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | 1-Wire, I2C, SPI, UART/USART, USB |
| Data Converter | A/D 4x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 524288 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 0.69mm |
| Length | 3.868mm |
| Width | 3.068mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX32625IWY+ Overview
To save space, it is included in the 63-WFBGA, WLBGA package. The way of mounting it is Surface Mount. This item can be found in package Tray. A core processor of ARM? Cortex?-M4F is present in the device. During work, the temperature should remain at -30°C~85°C TA. FLASH is the type of program memory used by it. A total of 40 I/Os are present. Based on the MAX32625 base part number, it can be compared with other components. At BOTTOM, it has its terminals. It has 63 terminationals. It is a member of the DARWIN series of electrical components. Because of the 1.2V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 63 pins are used to construct it. Data and programs can be stored on the devices with a memory size of 512kB. There is ARM core architecture for this system. The system is highly efficient when working at a frequency of 96MHz. There is also the property of ALSO REQUIRES 1.8V NOM SUPPLY, SEATED HGT-CALCULATED associated with it. In order to maintain normal operation, Vsup must be above 1.14V. The oscillator type Internal is used to operate the device.
MAX32625IWY+ Features
63-WFBGA, WLBGA package
Mounting type of Surface Mount
MAX32625IWY+ Applications
There are a lot of Maxim Integrated MAX32625IWY+ Microcontroller applications.
- Fabric
- Hearing aids
- Electronic jamming systems
- Torpedo guidance
- Routers
- Sonography (Ultrasound imaging)
- Binding machines
- Volt meter
- Industrial instrumentation devices
- Guidance-GPS
