MAX326CEE+

1μs, 500ns SPST - NC 3.5kOhm Analog Switches BREAK-BEFORE-MAKE MAX326 16 Pins 10pA 15V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX326CEE+
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 807
Description: 1μs, 500ns SPST - NC 3.5kOhm Analog Switches BREAK-BEFORE-MAKE MAX326 16 Pins 10pA 15V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	3.5kOhm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.635mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX326
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	18V
Min Supply Voltage	4.5V
Nominal Supply Current	90μA
Max Supply Current	30mA
Throw Configuration	SPST
Turn On Delay Time	1 μs
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~18V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	3.5kOhm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	10pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.7pF
On-state Resistance Match-Nom	175Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	1μs, 500ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	175 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	1000ns
Normal Position	NC
Height Seated (Max)	1.75mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX326CEE+ Overview

Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around 0°C~70°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. Based on SPST - NC switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. Search with MAX326 if you are looking for analog multiplexer variants. An switch multiplexer with 3.5kOhm internal resistance has a value of 3.5kOhm. For details about the functions of 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 4.5V as the lowest voltage for the electrical part. Put voltage above 30mA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. For dual power supplies, a voltage of at least 4.5V should be attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.