Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX327 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
+-15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Voltage - Supply, Single/Dual (±) |
10V~30V ±5V~18V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
3.5kOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
10pA |
Channel Capacitance (CS(off), CD(off)) |
1.7pF 1.7pF |
On-state Resistance Match-Nom |
75Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
1μs, 500ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
175 Ω |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
1000ns |
Switch-off Time-Max |
500ns |
Normal Position |
NO |
Length |
19.175mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX327CPE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used for these analog switches. A 4 circuit is present in this switch device. Try searching for the analog switch ic with MAX327 if you are looking for variants. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. There are SEPARATE OUTPUT outputs on this analog switch ic.
MAX327CPE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX327CPE+ Applications
There are a lot of Maxim Integrated MAX327CPE+ Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Optical Applications
- PBX interfaces
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ISDN NT1/TA
- Central office
- 65 V DACs
- Intelligent PBX
- Sample hold systems
- New designs requiring multiplexer functions