MAX327CSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX327 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3.5kOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 10pA |
| Channel Capacitance (CS(off), CD(off)) | 1.7pF 1.7pF |
| On-state Resistance Match-Nom | 75Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 1μs, 500ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 175 Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX327CSE+ Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around 0°C~70°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. SPST - NO switching circuits are used in these analog switch ics. This multiplexer is composed of 4 circuits. Look for analog switch ic variants by searching with MAX327. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX327CSE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX327CSE+ Applications
There are a lot of Maxim Integrated MAX327CSE+ Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Signal routing between systems
- PDH Multiplexers
- Audio and video routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Microwave transmission systems
- Precision test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio signal routing
- ATM
