MAX327ESE+

1μs, 500ns SPST - NO 3.5kOhm Analog Switches BREAK-BEFORE-MAKE MAX327 16 Pins 10pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX327ESE+
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 231
Description: 1μs, 500ns SPST - NO 3.5kOhm Analog Switches BREAK-BEFORE-MAKE MAX327 16 Pins 10pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	3.5kOhm
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX327
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	18V
Min Supply Voltage	5V
Nominal Supply Current	90μA
Max Supply Current	250μA
Throw Configuration	SPST
Turn On Delay Time	1 μs
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~18V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	3.5kOhm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	10pA
Channel Capacitance (CS(off), CD(off))	1.7pF 1.7pF
On-state Resistance Match-Nom	75Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	1μs, 500ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	175 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	1000ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX327ESE+ Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A total of 4 circuits make up this switch device. MAX327 can be used to search for analog multiplexer variants. This digital multiplexer has 3.5kOhm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. An effective Dual, Single supply digital multiplexer. 5V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 250μA. For this switch, a dual supply voltage is feasible, but it must not exceed 18VThe voltage should be at least 4.5V if you are using dual power supplies. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.