MAX328CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 3.5kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX328 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 4.5μA |
| Nominal Supply Current | 4.5μA |
| Throw Configuration | DPST |
| Propagation Delay | 1.5 μs |
| Turn On Delay Time | 1.5 μs |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 1 μs |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 84 dB |
| Current - Leakage (IS(off)) (Max) | 10pA |
| Channel Capacitance (CS(off), CD(off)) | 1.8pF 8pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 70 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX328CWE+ Overview
Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around 0°C~70°C TA are extended for operation. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Search with MAX328 if you are looking for analog multiplexer variants. This digital multiplexer has 3.5kOhm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 18V in normal situations. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 5V. The switch device would be able to operate with 4.5μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. When using dual power supplies, you should attach at least 5V.
MAX328CWE+ Features
8 Channels
4.5μA Supply Current
MAX328CWE+ Applications
There are a lot of Maxim Integrated MAX328CWE+ Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Precision test equipment
- Communication systems
- High reliability control systems
- SDH/SONET multiplexers
- RGB switches
- Precision instrumentation
- Medical
- Low-Voltage
- Channel Banks
