Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
3.5kOhm |
Max Power Dissipation |
1.538W |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.8mm |
Base Part Number |
MAX328 |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
25V |
Min Supply Voltage |
10V |
Operating Supply Current |
4.5μA |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
10V~30V ±5V~18V |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
0.2mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
18V |
On-State Resistance (Max) |
3.5kOhm |
Min Dual Supply Voltage |
5V |
High Level Output Current |
40mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
84 dB |
Current - Leakage (IS(off)) (Max) |
10pA |
Channel Capacitance (CS(off), CD(off)) |
1.8pF 8pF |
On-state Resistance Match-Nom |
30Ohm |
Switch Time (Ton, Toff) (Max) |
1.5μs, 1μs |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
70 Ω |
Switching |
BREAK-BEFORE-MAKE |
Height Seated (Max) |
0.8mm |
Length |
5mm |
Width |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX328ETE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-WQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. A 1 circuit is present in this switch device. Try searching with MAX328 to find analog multiplexer variants. Analog switches have 3.5kOhm internal resistance. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 10V. For this multiplexer to operate, 4.5μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. For dual power supplies, a voltage of at least 5V should be attached.
MAX328ETE+T Features
8 Channels
4.5μA Supply Current
MAX328ETE+T Applications
There are a lot of Maxim Integrated MAX328ETE+T Analog Switches & Multiplexers ICs applications.
- HDTV
- High speed data transmission line cards
- PDAs
- New designs requiring multiplexer functions
- Industrial control systems
- MP3 players
- ATM
- Microprocessor Controlled Analog Systems
- Relay replacements
- Medical systems