MAX329CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX329 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3.5kOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 84 dB |
| Current - Leakage (IS(off)) (Max) | 10pA |
| Channel Capacitance (CS(off), CD(off)) | 1.8pF 8pF |
| On-state Resistance Match-Nom | 30Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1μs |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 70 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Switch-off Time-Max | 1000ns |
| Signal Current-Max | 0.01A |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX329CPE Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Through Hole. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Extended operating temperature around 0°C~70°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Try searching with MAX329 if you're looking for variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
MAX329CPE Features
4 Channels
Switch Circuit: SP4T
MAX329CPE Applications
There are a lot of Maxim Integrated MAX329CPE Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Medical systems
- Routers
- Video switching
- Fiber In The Loop (FITL)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- USB 1.1 signal switching circuits
- Wireless Local Loop
- Access Concentrators
- SONET/SDH ADM
