MAX3318CPWR
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX3318 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Number of I/O | 8 |
| Nominal Supply Current | 2mA |
| Propagation Delay | 175 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 2.5V |
| Out Swing-Min | 7.4 V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 2.25V~3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
MAX3318CPWR Overview
The enhanced 20-TSSOP (0.173, 4.40mm Width) package makes it an excellent LED driver.The Tape & Reel (TR) package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 2.25V~3V power supply.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs with a supply voltage range of 2.5V can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.This transceiver is packaged with 20 market standard pinoutsSince the base part number MAX3318 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.Wide receiver with enhanced power dissipation control, 20-pin.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It is typical for this receiver to have a resolution of 2 bits when it is specified.There is a voltage supply of 2.5V required in order for this transceiver module to be operated.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.The module isolated transceiver implements a total of 1 transceivers.The part is embedded with 2 drivers, so it can be used with 2 devices.An IC with 8 standard serial inputs and outputs, this is a great IC to use.
MAX3318CPWR Features
Tape & Reel (TR) package
20 pin count
20 pins
MAX3318CPWR Applications
There are a lot of Texas Instruments MAX3318CPWR Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- Metro access rings
- Precision geodetic measurement
- Cordless telephone
- Wireless showroom
- Wireless transmission
- Desktop PC
- Single to Multimode Fiber Conversion
- Fiber distributed data interface (FDDI)
- Wired telephone
