MAX3318EIPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 2.25V~3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3318 |
| Pin Count | 20 |
| Operating Supply Voltage | 2.5V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 460Kbps |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 2.5V |
| Output Low Current-Max | 0.0005A |
| Out Swing-Min | 7.4 V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3318EIPW Overview
The enhanced 20-TSSOP (0.173, 4.40mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver consumes 2.25V~3V for its power supplyThere can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.With a supply voltage range of 2.5V, this line driver ic operates efficiently.20 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.This part number MAX3318 can be used to search for more variants based on the product type, temperature, package, etc.20-pin driver chip with enhanced power dissipation.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.There is usually a 2-bit resolution specified for this receiver when it is used.This transceiver module is designed to operate from an input voltage supply of 2.5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.This IC implements 1 transceivers overall.The integrator circuit has embedded 2 drivers.A can transceiver that has a current input of 2mA or greater may be affected by malfunctions.
MAX3318EIPW Features
Tube package
20 pin count
20 pins
MAX3318EIPW Applications
There are a lot of Texas Instruments MAX3318EIPW Drivers/Receivers/Transceivers applications.
- Precision engineering measurement
- Wireless projection application for conferences
- Indoor ad hoc meeting
- Satellite ground stations
- Wireless transmission
- Single fiber bidirectional application
- Cordless telephone
- Sensor reporting
- Precision geodetic measurement
- Military satellite communications
