MAX333ACWP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX333 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Drain to Source Resistance | 175Ohm |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX333ACWP+ Overview
Shipping overseas is convenient with the electronic component packed in 20-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around 0°C~70°C TA. Total terminations are 20. By its 4 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 20 pins. Multiplexers built on a SPDT switching circuit are built. Use MAX333 to search for variants of the digital switches. For details about the functions of 20 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Drain to Source resistance for this electronic component is 175Ohm.
MAX333ACWP+ Features
4 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 175Ohm
MAX333ACWP+ Applications
There are a lot of Maxim Integrated MAX333ACWP+ Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Access Concentrators
- Automotive applications
- USB 1.1 signal switching circuits
- Avionics and Military Systems
- SONET
- Multiplexers
- Avionics
- Cable Modem
- Modems
