MAX333AEUP+T
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 559mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX333 |
| Pin Count | 20 |
| Operating Supply Voltage | 20V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -78dB @ 1MHz |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
MAX333AEUP+T Overview
This electronic part is conveniently packaged in 20-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature around -40°C~85°C TA extended. There are 20 terminations totally. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. 20 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches. There are 4 circuits in this switch device. Try searching with MAX333 if you're looking for variants. A 35Ohm internal resistance characterizes this multiplexer. You can find the functions of the 20 pins in the datasheets. Multiplexers should not be powered above 30V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 10V. 1μA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 50μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. You should attach at least 4.5V voltage if you are using dual power supply. The electronic component can function from 20V.
MAX333AEUP+T Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX333AEUP+T Applications
There are a lot of Maxim Integrated MAX333AEUP+T Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- T1/E1 Terminals
- Fiber to the Home
- Medical systems
- E1 Network Equipment
- ATM
- PBX interfaces
- Communication systems
- USB 1.1 signal switching circuits
- High reliability control systems
