banner_page

MAX333EPP

1μs, 500ns SPDT 250Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 20 Pins 5nA 15V 20-DIP (0.300, 7.62mm)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX333EPP
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 265
  • Description: 1μs, 500ns SPDT 250Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 20 Pins 5nA 15V 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1995
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 20
Output SEPARATE OUTPUT
Pin Count 20
Number of Channels 1
Number of Circuits 4
Max Supply Voltage 30V
Min Supply Voltage 10V
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~18V
Neg Supply Voltage-Nom (Vsup) -15V
Max Dual Supply Voltage 18V
On-State Resistance (Max) 250Ohm
Min Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 72 dB
Current - Leakage (IS(off)) (Max) 5nA
Channel Capacitance (CS(off), CD(off)) 5pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 1μs, 500ns
Crosstalk -78dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 1000ns
Switch-off Time-Max 500ns
Length 26.16mm
Width 7.62mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

MAX333EPP Overview


As the electronic part is packed in 20-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 20 terminations. A 1 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 20 series of products. The analog switch ics are built using SPDT switching circuits. A 4 circuit is present in this switch device. To find out what the 20 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. It is recommended to use 10V as the lowest voltage for the electrical part. Despite this switch's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 5V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.

MAX333EPP Features


1 Channels
Switch Circuit: SPDT

MAX333EPP Applications


There are a lot of Maxim Integrated MAX333EPP Analog Switches & Multiplexers ICs applications.

  • SONET/SDH ADM
  • PBX interfaces
  • Intelligent PBX
  • Industrial and process control systems
  • Industrial
  • Modems
  • Data switching
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • FTTH
  • Medical Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good