MAX333MJP/883B
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-CDIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 250Ohm |
| Max Power Dissipation | 889mW |
| Operating Supply Voltage | 20V |
| Number of Circuits | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 250Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 1μs, 500ns |
| Crosstalk | -78dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX333MJP/883B Overview
As the electronic part is packed in 20-CDIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. On the other hand, analog switches can be constructed using SPDT switching circuits. It consists of 4 circuits. It has an internal resistance of 250Ohm. Please refer to the datasheets for 20 pins functions. Users shouldn't supply more than 30V voltage to the switch device. The lowest voltage the electronic part should receive is 10V. When the digital multiplexer is charged above 50μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 5V voltage attached. Operating voltages of 20V are compatible with the electrical part.
MAX333MJP/883B Features
Switch Circuit: SPDT
MAX333MJP/883B Applications
There are a lot of Maxim Integrated MAX333MJP/883B Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Digital cross connects (DSX-1)
- High reliability control systems
- Communications systems
- Frame Relay Equipment
- Signal routing between systems
- E1 Multiplexer
- Battery Powered Systems
- Routers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
