MAX334CPE+
| Parameters | |
|---|---|
| Package / Case | DIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SPST |
| Max Supply Current | 10mA |
| Turn On Delay Time | 120 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 72 dB |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX334CPE+ Overview
Packed in DIP, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 4. Internally, this switch multiplexer has a resistance of 50Ohm. The datasheets for the 16 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 30V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 10mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 15V. In the case of dual power supplies, you should connect at least 5V. It is integrated with SPST analog ICs. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Additional features include: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY. Temperatures over 70°C should not be allowed for the multiplexer to operate.
MAX334CPE+ Features
1 Channels
Additional Features: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY
MAX334CPE+ Applications
There are a lot of Maxim Integrated MAX334CPE+ Analog Switches & Multiplexers ICs applications.
- RGB switches
- PBX interfaces
- DVD-R
- PCMCIA cards
- SONET
- Relay replacements
- Cable Modem
- Fiber to the Home
- Communication systems
- Sample hold systems
