Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1995 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
50Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
750mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX334 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
15V |
Min Supply Voltage |
5V |
Nominal Supply Current |
4.5mA |
Max Supply Current |
4.5mA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
5V~30V ±5V~15V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
75 ns |
Max Dual Supply Voltage |
15V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
0.9Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
120ns, 75ns |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-86dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height Seated (Max) |
2.65mm |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
MAX334CWE Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to 0°C~70°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. 4 circuits are used in this analogue multiplexer. Try searching with MAX334 to find analog multiplexer variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 15V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage the electrical component should receive. Putting voltage greater than 4.5mA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 15VThe voltage should be at least 5V if you are using dual power supplies. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This electronic part has additional features, such as: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY.
MAX334CWE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY
MAX334CWE Applications
There are a lot of Maxim Integrated MAX334CWE Analog Switches & Multiplexers ICs applications.
- Central office
- New designs requiring multiplexer functions
- Access Concentrators
- ISDN NT1/TA
- Data switching
- Communication systems
- Audio and video routing
- Video switching
- Cellular phones
- Cable Telephony – NIU, Set-Top Box, Home Side Box