MAX334EPE+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX334 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±5V~15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.9Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 120ns, 75ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -86dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 50ns |
| Normal Position | NC |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX334EPE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. SPST - NC switching circuits are used in these analog switch ics. A total of 4 circuits make up this switch device. Try searching for the analog switch ic with MAX334 if you are looking for variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Additional features of the electronic component include: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY.
MAX334EPE+ Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATES WITH 5 TO 15 SINGLE SUPPLY
MAX334EPE+ Applications
There are a lot of Maxim Integrated MAX334EPE+ Analog Switches & Multiplexers ICs applications.
- Video switching
- Medical systems
- Precision data acquisition
- Communications systems
- USB 1.1 signal switching circuits
- Avionics test equipment
- Communication systems
- ATM
- SDH
- DSUs
