MAX335CNG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Crosstalk | -100dB @ 100kHz |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 400ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Length | 31.75mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
MAX335CNG Overview
Shipping overseas is convenient due to the electrical component's packing in 24-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of 0°C~70°C TA degrees Celsius. A total of 24 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 24 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NO switching circuits. There are 8 circuits in this multiplexer. Analog switch ics need a voltage of 4.5V to be powered.
MAX335CNG Features
1 Channels
Switch Circuit: SPST - NO
MAX335CNG Applications
There are a lot of Rochester Electronics, LLC MAX335CNG Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Signal routing between systems
- Video switching
- Sample hold systems
- Fiber In The Loop (FITL)
- E1 Multiplexer
- Power routing
- Precision test equipment
- ISDN NT1/TA
- Digital access cross connects
