MAX335CWG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX335 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Crosstalk | -100dB @ 100kHz |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 400ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX335CWG Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. In total, there are 24 terminations. High-quality output is provided by the electronic component's 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 24 series. Multiplexers built on a SPST - NO switching circuit are built. Look for analog switch ic variants by searching with MAX335. There is Multiplexer or Switches analog multiplexer like this in the world. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Analog switch ics need a voltage of 4.5V to be powered.
MAX335CWG Features
8 Channels
Switch Circuit: SPST - NO
MAX335CWG Applications
There are a lot of Maxim Integrated MAX335CWG Analog Switches & Multiplexers ICs applications.
- Communications systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Voice over IP/DSL – Integrated Access Devices, Smart
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fiber In The Loop (FITL)
- Remote Powered Equipment
- Video switching
- Cable PC
- Fault Tolerant Systems
- Data Acquisition Systems
