MAX335EUG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX335 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Crosstalk | -100dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 400ns |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 1.1mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX335EUG+ Overview
The electrical component comes in 24-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. In total, there are 24 terminations. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There is an electrical component included in the 24 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. A 8 circuit is present in this switch device. Try searching with MAX335 to find analog multiplexer variants. You can find the functions of the 24 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In order to power the analogue multiplexer, it requires an input voltage of 4.5V volts.
MAX335EUG+ Features
1 Channels
Switch Circuit: SPST - NO
MAX335EUG+ Applications
There are a lot of Maxim Integrated MAX335EUG+ Analog Switches & Multiplexers ICs applications.
- Medical systems
- HDTV
- Medical Instrumentation
- Audio and video switching
- Video signal routing
- PDH Multiplexers
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial and process control systems
- Video switching
- Access Concentrators
