MAX335EUG+T
| Parameters | |
|---|---|
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Crosstalk | -100dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 1.1mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 150Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.067W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX335 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Operating Supply Voltage | 20V |
| Power Supplies | 5/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 150μA |
| Max Supply Current | 150μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 400 ns |
MAX335EUG+T Overview
Packed in 24-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, 24 terminations have occurred. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 24 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. The multiplexer consists of 8 circuits. Try searching for the analog switch ic with MAX335 if you are looking for variants. It has an internal resistance of 150Ohm. Datasheets for functions of 24 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Digital switch that provides Dual power at a cost-effective price. It may damage the digital multiplexer if the voltage is higher than 150μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 20V operating voltages are supported by the electronic component.
MAX335EUG+T Features
1 Channels
Switch Circuit: SPST - NO
MAX335EUG+T Applications
There are a lot of Maxim Integrated MAX335EUG+T Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Data switching
- Relay replacements
- ATM
- Industrial and process control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Optical Applications
- Channelized and Unchannelized DS3 applications
- PBX interfaces
- Industrial
