MAX335EWG+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 150Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.067W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX335 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Operating Supply Voltage | 20V |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 150μA |
| Max Supply Current | 150μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 400 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 150Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 2pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 400ns |
| Crosstalk | -100dB @ 100kHz |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX335EWG+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-SOIC (0.295, 7.50mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 24. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. This electrical component is included in the 24 series of products. Multiplexers built on a SPST - NO switching circuit are built. A total of 8 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with MAX335. The internal resistance of this digital multiplexer is 150Ohm. To find out what the 24 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Digital switch that provides Dual power at a cost-effective price. Putting voltage greater than 150μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There is a voltage range of 20V operating voltages for the electrical part.
MAX335EWG+T Features
1 Channels
Switch Circuit: SPST - NO
MAX335EWG+T Applications
There are a lot of Maxim Integrated MAX335EWG+T Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- E1 Multiplexer
- RGB switches
- Fiber to the Home
- New designs requiring multiplexer functions
- Fiber In The Loop (FITL)
- PCMCIA cards
- Automatic test equipment
- Avionics and Military Systems
- Audio/video switches
