MAX336CAI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX336 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX336CAI+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-SSOP (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 16:1. Temperatures around 0°C~70°C TA are extended for operation. In total, 28 terminations have occurred. A 16 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 28 pins. Circuits number 1 make up this analogue multiplexer. Try searching for MAX336 variants of the analog switch ic. There is 400Ohm internal resistance in this digital multiplexer. To find out what the 28 pins do, please refer to the datasheets. Users shouldn't supply more than 30V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. 4.5V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1μA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. 28V operating voltages can be used with this electrical part.
MAX336CAI+T Features
16 Channels
1μA Supply Current
MAX336CAI+T Applications
There are a lot of Maxim Integrated MAX336CAI+T Analog Switches & Multiplexers ICs applications.
- Isolation
- Digital cross connects (DSX-1)
- Channelized and Unchannelized DS3 applications
- Sample hold systems
- Precision instrumentation
- SONET/SDH ADM
- Public switching systems
- Industrial
- Communication systems
- Audio and video routing
