MAX336EAI
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX336 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Width | 5.29mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX336EAI Overview
Presented in 28-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. Total terminations are 28. A electrical component with 16 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 28 pins are injected into the electrical part body. There are 1 circuits in this multiplexer. Try searching with MAX336 if you're looking for variants. Internally, this switch multiplexer has a resistance of 400Ohm. You can find the functions of the 28 pins in the datasheets. normally, users should not supply switches with voltages higher than 30V. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 4.5V. For this multiplexer to operate, 1μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. It is recommended that you attach at least 4.5V to your dual power supply. 28V operating voltages can be used with this electrical part.
MAX336EAI Features
16 Channels
1μA Supply Current
MAX336EAI Applications
There are a lot of Maxim Integrated MAX336EAI Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Video switching
- Fiber to the Home
- Sample hold systems
- T1/E1 Terminals
- Automotive applications
- Communications systems
- Precision data acquisition
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial and process control systems
