MAX336EAI-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX336 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX336EAI-T Overview
Shipping overseas is convenient with the electronic component packed in 28-SSOP (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. Increasing operating temperature to around -40°C~85°C TA. In total, there are 28 terminations. A electrical component with 16 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 28 pins. A 1 circuit is present in this switch device. Try searching with MAX336 if you're looking for variants. There is 400Ohm internal resistance in this digital multiplexer. You can find the functions of the 28 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. An effective Dual, Single supply digital multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 1μA current would suffice. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V. Operating voltages range from 28V.
MAX336EAI-T Features
16 Channels
1μA Supply Current
MAX336EAI-T Applications
There are a lot of Maxim Integrated MAX336EAI-T Analog Switches & Multiplexers ICs applications.
- Communication systems
- Automatic test equipment
- Modems
- Channelized and Unchannelized DS3 applications
- DSUs
- Imaging
- Voice over IP/DSL – Integrated Access Devices, Smart
- Medical
- Intelligent PBX
- Microwave transmission systems
