MAX336EPI

500ns, 500ns 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX336 28 Pins 20pA 15V 28-DIP (0.600, 15.24mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX336EPI
Package: 28-DIP (0.600, 15.24mm)
Datasheet: PDF
Stock: 739
Description: 500ns, 500ns 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX336 28 Pins 20pA 15V 28-DIP (0.600, 15.24mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	28-DIP (0.600, 15.24mm)
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	400Ohm
Max Power Dissipation	1.14W
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX336
Pin Count	28
Operating Supply Voltage	28V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Operating Supply Current	1μA
Propagation Delay	500 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~20V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	82 dB
Current - Leakage (IS(off)) (Max)	20pA
Channel Capacitance (CS(off), CD(off))	2pF 20pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	500ns, 500ns
Charge Injection	3.5pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-86dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	5.08mm
Length	36.83mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

MAX336EPI Overview

Due to its 28-DIP (0.600, 15.24mm) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 16:1. Temperatures around -40°C~85°C TA are extended for operation. 28 terminations have been made so far. High-quality output is provided by the electronic component's 16 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. It is injected into the electrical part body with 28 pins. There are 1 circuits in this multiplexer. Try searching with MAX336 if you're looking for variants. Internally, this switch multiplexer has a resistance of 400Ohm. Please refer to the datasheets for 28 pins functions. Multiplexers should not be powered above 30V in normal situations. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage the electrical component should receive. 1μA current would be enough for this multiplexer to operate. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. This electrical part is compatible with 28V operating voltages.