Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2014 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
400Ohm |
Max Power Dissipation |
1W |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX336 |
Pin Count |
28 |
Number of Channels |
16 |
Number of Circuits |
1 |
Max Supply Voltage |
30V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
1μA |
Propagation Delay |
500 ns |
Turn On Delay Time |
600 ns |
Logic Function |
Multiplexer |
Voltage - Supply, Single/Dual (±) |
4.5V~20V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
500 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
400Ohm |
Min Dual Supply Voltage |
4.5V |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
82 dB |
Current - Leakage (IS(off)) (Max) |
20pA |
Channel Capacitance (CS(off), CD(off)) |
2pF 20pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Time (Ton, Toff) (Max) |
500ns, 500ns |
Charge Injection |
3.5pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Crosstalk |
-86dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.03A |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
MAX336EWI Overview
As the electronic part is packed in 28-SOIC (0.295, 7.50mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. There are 28 terminations totally. High-quality output is provided by the electronic component's 16 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There is an electrical component included in the 28 series. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with MAX336. This digital multiplexer has 400Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. A voltage higher than 30V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 4.5V. For this multiplexer to operate, 1μA current would be sufficient. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. With dual power supplies, you should attach at least 4.5V.
MAX336EWI Features
16 Channels
1μA Supply Current
MAX336EWI Applications
There are a lot of Maxim Integrated MAX336EWI Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- MP3 players
- Remote wireless modules
- Audio and video signal routing
- Power routing
- High reliability control systems
- Low-Voltage
- SONET/SDH ADM