MAX3378EEUD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Power Supply Decoupling, Thermal-Shutdown Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 255 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX3378 |
| Pin Count | 14 |
| Output Type | Open Drain, Tri-State |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 130μA |
| Propagation Delay | 15 ns |
| Logic Function | Translator |
| Data Rate | 16Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Supply Voltage1-Nom | 3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3378EEUD+T Overview
Level translators is integrated into the 14-TSSOP (0.173, 4.40mm Width) package.This package has the format of Tape & Reel (TR).The output it is configured with uses Open Drain, Tri-State.Level translators is the Voltage Level type of translator that is used in this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.Bidirectional is the type of channel for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.Transmission lines can be terminated using 14 terminations to end them.A series of related parts can be determined from the base part number MAX3378.This device is powered by a supply voltage of 1.8V which is applied to it.Pin count is 14.Level translators is designed wLevel translatorsh 14 pins.There is a maximum voltage of 5.5V supported.With a minimum supply voltage of 1.65V, it operates.In the VCCA supply rail, 1.2V~5.5V is configured.1.65V~5.5V is the supply rail configuration on the VCCB.This electronic part is mounted in the way of Surface Mount.The number of channels is growing strong/weak: 4.In Other Interface ICs, you will find this part.When operating, Power Supply Decoupling, Thermal-Shutdown Protection can be ensured.The USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION characteristics are also present.
MAX3378EEUD+T Features
14-TSSOP (0.173, 4.40mm Width) package
1 circuits
14 pin count
14 pins
MAX3378EEUD+T Applications
There are a lot of Maxim Integrated MAX3378EEUD+T voltage translators & level shifters applications.
- Public Signage
- Personal computing
- Telematics
- Temperature Ranges (1)
- General purpose I/O level shifting
- One Assembly
- Available in Military (-55°C to 125°C)
- Controlled Baseline
- Available in Military (–55°C/125°C) Temperature Range
- Personal Electronics
