MAX337CAI+T
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX337 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 1.11mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
MAX337CAI+T Overview
Packed in 28-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Increasing operating temperature to around 0°C~70°C TA. There are 28 terminations totally. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 28 pins. This multiplexer is composed of 2 circuits. MAX337 can be used to search for analog multiplexer variants. It has an internal resistance of 400Ohm. You can find the functions of the 28 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 30V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. The switch device would be able to operate with 1μA current. Despite this switch's dual supply capability, its voltage should not exceed 20V. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 28V voltage levels.
MAX337CAI+T Features
8 Channels
1μA Supply Current
MAX337CAI+T Applications
There are a lot of Maxim Integrated MAX337CAI+T Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Ultrasound
- DVD-R
- Industrial control systems
- PDH Multiplexers
- E1 Multiplexer
- PBXs
- Industrial and process control systems
- Precision data acquisition
- Medical systems
