MAX337EWI+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | MAX337 |
| Pin Count | 28 |
| Operating Supply Voltage | 28V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 1.11mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 500 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 400Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX337EWI+T Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. In total, there are 28 terminations. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 28 series. A 2 circuit is present in this switch device. MAX337 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 400Ohm. In normalcircumstances, users should not exceed 30V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. There should be 4.5V voltage fed to the electrical part below 4.5V. 1μA current would be enough for this multiplexer to operate. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 28V voltage levels.
MAX337EWI+T Features
8 Channels
1μA Supply Current
MAX337EWI+T Applications
There are a lot of Maxim Integrated MAX337EWI+T Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Low-Voltage
- Data switching
- Video switching
- CSU
- PDAs
- Remote Powered Equipment
- Frame Relay Equipment
- Modems
- Signal routing between systems
