MAX338ETE+
| Parameters | |
|---|---|
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX338 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~30V ±4.5V~20V |
| Supply Current-Max (Isup) | 0.6mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 11pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
MAX338ETE+ Overview
This electronic part is conveniently packaged in 16-WQFN Exposed Pad, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. Due to its 8 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MAX338 if you are looking for variants. The analog multiplexer shown here is a typical Multiplexer or Switches. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
MAX338ETE+ Features
8 Channels
MAX338ETE+ Applications
There are a lot of Maxim Integrated MAX338ETE+ Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Data Acquisition Systems
- Routers
- MP3 players
- Private Branch Exchange (PBX)
- SDH
- Audio signal routing
- 65 V DACs
- Cable PC
- E1 Multiplexer
