MAX338ETE+T

500ns, 500ns 400Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX338 16 Pins 20pA 15V 16-WQFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX338ETE+T
Package: 16-WQFN Exposed Pad
Datasheet: PDF
Stock: 333
Description: 500ns, 500ns 400Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX338 16 Pins 20pA 15V 16-WQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	400Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	1.702W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.8mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX338
Pin Count	16
Operating Supply Voltage	28V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Operating Supply Current	1μA
Propagation Delay	500 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.6mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	20pA
Channel Capacitance (CS(off), CD(off))	3pF 11pF
On-state Resistance Match-Nom	4Ohm
Switch Time (Ton, Toff) (Max)	500ns, 500ns
Charge Injection	1.5pC
Channel-to-Channel Matching (ΔRon)	4 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	0.8mm
Length	5mm
Width	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX338ETE+T Overview

This electronic part is conveniently packaged in 16-WQFN Exposed Pad, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with MAX338 if you are looking for variants. Internally, this switch multiplexer has a resistance of 400Ohm. Datasheets for 16 pin functions are available upon request. Users shouldn't supply more than 30V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 4.5V. For this multiplexer to operate, 1μA current would be sufficient. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. There is a voltage range of 28V operating voltages for the electrical part.