banner_page

MAX338MSE/PR3+

500ns, 500ns 400Ohm Analog Switches MAX338 20pA 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX338MSE/PR3+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 151
  • Description: 500ns, 500ns 400Ohm Analog Switches MAX338 20pA 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Operating Temperature -55°C~125°C
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Base Part Number MAX338
Number of Circuits 1
Max Supply Voltage 30V
Min Supply Voltage 4.5V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Voltage - Supply, Single/Dual (±) 4.5V~30V ±4.5V~20V
Max Dual Supply Voltage 20V
On-State Resistance (Max) 400Ohm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 8:1
Current - Leakage (IS(off)) (Max) 20pA
Channel Capacitance (CS(off), CD(off)) 3pF 11pF
Switch Time (Ton, Toff) (Max) 500ns, 500ns
Charge Injection 1.5pC
Channel-to-Channel Matching (ΔRon) 4 Ω (Typ)
Crosstalk -92dB @ 100kHz
Radiation Hardening No
RoHS Status RoHS Compliant

MAX338MSE/PR3+ Overview


The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C extended. The circuits in this analogue multiplexer number 1. Try searching for MAX338 variants of the analog switch ic. Users should never supply a voltage higher than 30V to a switch device. There should be 4.5V voltage fed to the electrical part below 4.5V. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.

MAX338MSE/PR3+ Features



MAX338MSE/PR3+ Applications


There are a lot of Maxim Integrated MAX338MSE/PR3+ Analog Switches & Multiplexers ICs applications.

  • Channel Banks
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • 65 V DACs
  • Transmit
  • Isolation
  • Medical Instrumentation
  • Battery Powered Systems
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good