MAX3391EEUD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Feature | Power Supply Decoupling, Thermal-Shutdown Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3391 |
| Pin Count | 14 |
| Output Type | Open Drain, Tri-State |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 300μA |
| Output Current | 1mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Translator |
| Data Rate | 16Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Unidirectional |
| Low Level Output Current | 20μA |
| Interface Standard | GENERAL PURPOSE |
| Supply Voltage1-Nom | 3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3391EEUD+ Overview
There is an embedded version of it in package 14-TSSOP (0.173, 4.40mm Width).A Tube package is used to package it.Level translators uses Open Drain, Tri-State as level translatorss output configuration.The translator type of this electrical device is Voltage Level.Level translators is mounted according to the Surface Mount method.Unidirectional is the type of channel for this electrical device.A temperature of -40°C~85°C TA is used for operation.In order to achieve its superior flexibility, 1 circuits are used.Transmission lines are terminated using 14 terminations.A series of related parts can be determined from the base part number MAX3391.This device is powered by a supply voltage of 1.8V which is applied to it.Pin count is 14.Level translators has 14 pins.There is a maximum voltage of 5.5V supported.A voltage of 1.65V is the minimum supply voltage required for it to operate.From 1.2V~5.5V, the supply rail of the VCCA is configured.From 1.65V~5.5V, the supply rail of the VCCB is configured.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Channel count is 4.In order to ensure Power Supply Decoupling, Thermal-Shutdown Protection during operation, there are several things to consider.Because it features a 1mA output current, maximum design flexibility can be achieved.There are also characteristics of USED FOR SPI, MICROWIRE AND I2C LEVEL TRANSLATION associated with it.
MAX3391EEUD+ Features
14-TSSOP (0.173, 4.40mm Width) package
1 circuits
14 pin count
14 pins
MAX3391EEUD+ Applications
There are a lot of Maxim Integrated MAX3391EEUD+ voltage translators & level shifters applications.
- Industrial equipment
- Product Traceability
- Printers and Other Peripherals
- General purpose I/O level shifting
- Motor Drives
- Signaling Level Conversion for Clock or Data
- MDIO
- Temperature Ranges (1)
- ADAS Fusion
- Enterprise
