MAX3394EETA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Auto-Direction Sensing, Power Supply Decoupling, Thermal-Shutdown Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 1.455W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3394 |
| Pin Count | 8 |
| Output Type | Open Drain, Push-Pull, Tri-State |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 150μA |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 600 ns |
| Logic Function | Translator |
| Data Rate | 6Mbps |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 1 |
| High Level Output Current | -15mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 10mA |
| Receiver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX3394EETA+T Overview
In the package 8-WFDFN Exposed Pad, it can be found.A package of Tape & Reel (TR) has been used.This output uses Open Drain, Push-Pull, Tri-State.There is Voltage Level translator type for this electrical device.Surface Mount is the way in which this electronic part is mounted.In this electrical device, the Channel type is Bidirectional.The operating temperature is -40°C~85°C TA.Flexible 1 circuits enable it to achieve high performance.As part of the transmission line termination process, there are a total of 8 terminations.According to the base part number MAX3394, its related parts can be founded.A supply voltage of 3.3V powers it.Level translators has 8 pins.Level translators has 8 pins.There is a maximum voltage of 5.5V supported.1.65V is its minimum supply voltage.From 1.2V~5.5V, the supply rail of the VCCA is configured.1.65V~5.5V is the supply rail configuration on the VCCB.This mount is done using the method of Surface Mount.Level translators is 2 channels.Other Interface ICs contains this part.Operating can ensure that Auto-Direction Sensing, Power Supply Decoupling, Thermal-Shutdown Protection is achieved.
MAX3394EETA+T Features
8-WFDFN Exposed Pad package
1 circuits
8 pin count
8 pins
MAX3394EETA+T Applications
There are a lot of Maxim Integrated MAX3394EETA+T voltage translators & level shifters applications.
- PMBus
- I2C
- Products With Many I
- Routers (Telecom Switching Equipment)
- Monitors
- UART
- Tablet
- Automotive
- Telematics
- Servers
